|
|
Hey guys,
I'm in the need of some advice please?
I'm in the process of building a system for my house and have just purchased an A2060 after a fair bit of research.
I have also purchased a Rel T7/I subwoofer for the system.
I'm just in the process of on bench testing the components I have as I have yet to put sound proofing and plasterboard in place and this is where I have come up with some confusion.
When I have come to connect the subwoofer I cant seem to get it to work.
I have wired as per the Rel instructions (red wire to right had red terminal, yellow wire to left hand red terminal, black wire to left hand black terminal) to a speaker output as the A2060 only has an audio jack for the subwoofer.
What would be the suggestion to try next? Am I right in thinking that I will need a audio jack and combine the red/yellow wires together to connect to the Yamaha audio out for the subwoofer and leave the black wire floating?
Many Thanks
Ian |
|
Post time 2018-7-4 12:10:03