CT-ink Audio Forum

 Forgot password?
 Register
View: 292|Reply: 0

Finished building the Parts Express flat pack

[Copy link]

2

Threads

4

Posts

14

Credits

Novice

Rank: 1

Credits
14
Post time 2018-7-4 12:10:03 | Show all posts |Read mode
No pictures yet, but I have some problems. When I assembled the enclosures I made sure the braces were squared against the bottom of the enclosure. I thought since the braces were squared, the rest of the enclosure should line up. I thought wrong, upon final assembly of the enclosure, the corners are not lined up. They're somewhat out of sync in some corners. What could I have done different for it to come out perfectly square all the way around? Should I sand the areas that are not squared with a file? This is my first diy by the way.
Sent from my LG-LS997 using Tapatalk
Reply

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Archiver|Mobile version|Dark room|CT-ink Inc.  

2018-12-19 11:10 GMT+8 , Processed in 0.065193 second(s), 23 queries , Xcache On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list